Jump to content


Photo

So, Been A While. Internet Problems...


  • Please log in to reply
8 replies to this topic

#1 alone

alone
  • Members
  • 2261 posts

Posted 01 July 2007 - 05:34 PM

Basicly, it goes like this;



Computer mooses up (kept rebooting itself, solved by removing HD, placing in spare machine, running virus scan and removing virus')

Then have to use Windows XP disk to recover it, and don't lose any data.

Now I can't appear to get on the internet, at all.

I'm able to access the local network, and share files etc, just no internet.



We use a 4way switch. Internet comes into the switch, and obviously it does its stuff (well, is meant to). The net works on all the other machines except mine.



Tried plugging the cable direct into the modem, still no joy. We're on NTL, so the net's always alive. Have attempted putting in IPs etc manually, but to no avail.



In the command prompt I can ping the default gateway (apparent that's a good sign? yes, no?)



Any help at all would be sweet...



Thanks all!
"Entertain yourself with my nightmares."
- AfterAll

Bunny!

#2 JLH

JLH

    Administrator

  • Admin
  • 1771 posts

Posted 03 July 2007 - 07:49 PM

you are trying to get multiple machines on the internet with NTL (same isp i use) without a router? can't be done without 1 machine acting as a router, ntl only give out 1 ip at a time.
Anything i post on here is subject to change at any time without notification to the board.

#3 alone

alone
  • Members
  • 2261 posts

Posted 04 July 2007 - 12:10 PM

It's a Lynksys Broadband Router, which says it has a 4-way switch.. It's always worked before, and the problem only started after my computer died. It's also currently working with 3 other machines connected through the switch/router. I have already tried just my computer connected to the router.

I can still ping the gateway (which I assume is the router), but when I try ping a website/IP it says it's unable to connect to Host.
"Entertain yourself with my nightmares."
- AfterAll

Bunny!

#4 JLH

JLH

    Administrator

  • Admin
  • 1771 posts

Posted 04 July 2007 - 05:35 PM

so you have the cable modem connected to the router's WAN port, and all the pcs on the LAN port i assume since the other 3 work
since the other 3 work, and yours doesn't, your networking config is probs messed up, go into tcp/ip properties on the network card and make sure both ip and dns is set to auto
Anything i post on here is subject to change at any time without notification to the board.

#5 alone

alone
  • Members
  • 2261 posts

Posted 04 July 2007 - 08:09 PM

Tried entering it myself, and selecting auto. Doesn't work either way... One difference, if I tell it to 'repair' the connection when it's set to auto, it says it's unable to renew the IP Address.
"Entertain yourself with my nightmares."
- AfterAll

Bunny!

#6 JLH

JLH

    Administrator

  • Admin
  • 1771 posts

Posted 04 July 2007 - 10:16 PM

download winsock xp fix, rebuilds it all, might sort it if a virus or something has recked the networking.
Anything i post on here is subject to change at any time without notification to the board.

#7 alone

alone
  • Members
  • 2261 posts

Posted 05 July 2007 - 02:44 PM

You so rock my work! Working good!
"Entertain yourself with my nightmares."
- AfterAll

Bunny!

#8 JLH

JLH

    Administrator

  • Admin
  • 1771 posts

Posted 05 July 2007 - 05:06 PM

well if you feel like donating for a custom pic, the info is on the website :)
Anything i post on here is subject to change at any time without notification to the board.

#9 Rump

Rump
  • Members
  • 149 posts

Posted 13 August 2007 - 04:16 PM

ok i have the same problem but when i d/led winsock xp fix thing an ran it on my computer that didn't work it said it repaired it but when i reboot i still have the same problem.... any other suggestions
plz?

Edited by Rump, 13 August 2007 - 04:51 PM.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users